THE FINISHER’S CHOICE
Concria™ Plastic Floating Pans remain today the finisher’s choice when the
high FF Numbers (Floor Flatness) are specified on concrete floors and when
an aesthetic uniform surface is needed. Plastic pans are attached to standard
steel pans easily and fast with a patented velcro fastener system.
THE FINISHER’S CHOICE
Concria™ Plastic Floating Pans remain today the finisher’s choice when the high FF Numbers (Floor Flatness) are specified on concrete floors and when an aesthetic uniform surface is needed. Plastic pans are attached to standard
steel pans easily and fast with a patented velcro fastener system.
FIT EASILY TO EVERY POWER TROWEL
Thanks to the patented Concria™ Hook & Loop Fastener system, you can attach Concria™ plastic pans over your standard metal pans with Hook & Loop Fasteners. You can quickly change plastic pans to new ones. Plastic pans are available in all standard power trowel sizes from 24” edger up to 60” ride-on trowel pans.
FIT EASILY TO EVERY POWER TROWEL
ECONOMY AND HIGH WEAR RESISTANCE
Concria™ Plastic pans composite material provides more outstanding durability than steel and is often cheaper per sq ft than metal pans.
Smoother and uniformly finished surface
Plastic pans bring fewer aggregates on top while floating and minimize aggregates popouts and reduce the chance of surface delamination. Plastic pans eliminate the risk of leaving burn marks and create a more uniform color surface than steel pan.
Denser slab with acoustic pressure
Concria™ Plastic float pans have an acoustic impedance (ratio of the acoustic pressure) that matches the concrete, thereby imparting its energy into the concrete mass, which causing the concrete to set from the bottom of the slab to the top while maintaining an open surface to allow bleed water to escape during finishing.
ECONOMY AND HIGH WEAR RESISTANCE
Concria™ Plastic pans composite material provides more outstanding durability than steel and is often cheaper per sq ft than metal pans.
Smoother and uniformly finished surface
Plastic pans bring fewer aggregates on top while floating and minimize aggregates popouts and reduce the chance of surface delamination. Plastic pans eliminate the risk of leaving burn marks and create a more uniform color surface than steel pan.
Denser slab with acoustic pressure
Concria™ Plastic float pans have an acoustic impedance (ratio of the acoustic pressure) that matches the concrete, thereby imparting its energy into the concrete mass, which causing the concrete to set from the bottom of the slab to the top while maintaining an open surface to allow bleed water to escape during finishing.
Higher FF numbers
Steel pans dig deeper than plastic pans and move more surface mortar/cream, making the floor less flat. With plastic float pans, you also minimize the risk of troughing better than with steel pans if the concrete is too soft or if you hit a wet spot. Plastic provides an easier transition from wet to dry areas when floating
Faster Finishing time
Concria™ Plastic float pans provide a faster finish time as plastic doesn’t dig deep as steel, and you can start a little bit earlier with plastic pans.
Higher FF numbers
Steel pans dig deeper than plastic pans and move more surface mortar/cream, making the floor less flat. With plastic float pans, you also minimize the risk of troughing better than with steel pans if the concrete is too soft or if you hit a wet spot. Plastic provides an easier transition from wet to dry areas when floating
Faster Finishing time
Concria™ Plastic float pans provide a faster finish time as plastic doesn’t dig deep as steel, and you can start a little bit earlier with plastic pans.